UH-IIDM
ultrasonic extractor is to transfer the ultrasonic wave generated by the ultrasonic transducer through the medium (usually water) and act on the sample, which is an indirect mode of action.
Availability date:
Description:
At present, the widely used ultrasonic extractor in laboratory is to transfer the ultrasonic wave generated by the ultrasonic transducer through the medium (usually water) and act on the sample, which is an indirect mode of action. The extraction efficiency depends on the vibration intensity High and low, in order to solve the problem of low extraction efficiency, people often increase the extraction efficiency by increasing the ultrasonic generator power (≥300W). However, the larger ultrasonic power will cause unpleasant noise again.
Microwave-assisted extraction technology is the use of target molecules in the sample under the action of microwave electromagnetic field, from the original state of thermal motion to follow the microwave alternating electromagnetic field and quickly arranged orientation, the microwave energy into the sample energy to accelerate the target The process of entering the solvent phase from the solid phase. The existing microwave-assisted extraction equipment, including high-pressure closed and atmospheric pressure open two, although each has its advantages, but there are some shortcomings. For example, high-pressure microwave-assisted extractives require very high strength and tightness of the extraction can material with small sample throughputs (about 0.5-5 g) and long cooling times. Atmospheric pressure open microwave assisted extraction to some extent to overcome the lack of high-pressure closed-end, sample handling capacity also increased significantly, but the sample processing time is longer, the work efficiency decreased.
Features:
Product parameters:
Combination of functions | Various combinations of microwave, ultrasonic wave, light wave, ultraviolet ray and magnetic stirring can be selected |
Microwave Power | 1000W (1% -100%); |
Microwave Frequency | 2450 MHz; |
Working Hours | 0-999S |
microwave mode of action | pulsed continuous heating; |
Optical power / wavelength | 0-800W / infrared section; Working time 0-999S |
UV power / wavelength | 50W / 365nm; |
ultrasonic horn diameter | Φ6mm; |
Ultrasonic power / frequency | 10-1000W / 20-25 KHz; |
Ultrasonic mode of action | Immersion ultrasonic transducer is in direct contact with the material in the vessel, the acoustic vibration (energy) efficiency is close to 100%; |
magnetic stirring | 50-300 rev / min |
Program control | 200 sets of programs can be preset. Each program can preset working time (0-999S), microwave, light wave, ultrasonic power, UV (on / off) Modify and call |
temperature control | non-contact infrared temperature measurement. Temperature and temperature range, room temperature ~ 300 ℃ (± 1 ℃); |
machine control | full Chinese color touch screen man-machine interface, industrial-grade microcomputer PLC programmable logic controller; |
password | user, administrator password; |
reactor monitoring | one screen with real-time video window to monitor the reaction status of the sample; |
LED lighting power / color temperature | 24W / 6200K; |
Network Interface | RJ45 |
Sample volume | standard 500,1000 mL (special specifications can be customized according to user requirements); |
Protection | with magnetron temperature protection, door switch protection and other multiple safety chain protection device, with high reliability and safety. |
Material | Stainless steel inner shell, durable |
cavity volume | 25 L; |
Power | 220 V ± 10% AC, 50 Hz; 3000W; |
Microwave leakage in line with national standards |