Home > >>Rust & Corrosion

Rust & Corrosion

Information

Rust & Corrosion 

  • PT-D665-0232 Liquefied Petroleum Gas Copper Corrosion Tester is designed and made as per Industry Standard of Petrochemical SH/T0232 “Test Methods for Detection of Copper Corrosion from Liquefied Petroleum Gas by the Copper Strip Tarnish Test”. It is suitable to determine corrosiveness of liquefied petroleum gas to copper strip.

  • PT-D665-11143 Lubricating Oil Rust Characteristics Tester is designed and made as per the National Standard GB/T11143 “Test Methods for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water”, ASTM D665, and IP135.

  • PT-D665-5096 Rust Characteristics and Corrosion Tester is made as per standards ASTM D130 and ASTM D665. It is a multifunctional tester for determining corrosion and rust-preventing characteristics of petroleum products.

  • PT-D130-5096A Copper Strip Corrosion Tester is designed and made as per the National Standard GB/T5096 “Test Methods for Detection of Copper Corrosion from Petroleum Products by the Copper Strip Tarnish Test”. 

  • PT-D130-5A Rust corrosion tester is designed and manufactured according to the provisions of the national standard GB/T11143, for determination corrosion of the metal when lubricating oil, hydraulic oil, turbine oil and other oils in aqueous, can do copper, silver pieces and liquid rust test.

  • The  tester conforms to the ASTM D130 standard. the apparatus can determinate of the corrosiveness to copper of aviation gasoline, aviation turbine fuel, automotive gasoline, cleaners (Stoddard) solvent, kerosine, diesel fuel, distillate fuel oil, lubricating oil, and natural gasoline or other hydrocarbons having a vapor pressure no greater than 124 kPa...

  • PT-D130-1021 (1021A)Silver strip corrosion tester for jet fuel is suitable to the standards of ASTM D130 and IP227. It can test the resistance to the copper corrosion of aviation gasoline, jet fuel, motor gasoline, natural gas and other products RVP of which RVP is not higher than 124kPa. It can test corrosion tendency of silver component of jet fuel for...

  • It is used to test the ability of turbine, hydraulic, and gear oils to separate entrained air. This apparatus measures the time for the entrained air content to fall to the relatively low value of 0.2% volume under a standardized set of test conditions and hence permits the comparison of the ability of oils to separate entrained air under conditions where...

  • Copper corrosion limits provide assurance that difficulties will not be experienced in deterioration of the copper and copper-alloy fittings and connections that are commonly used in many types of utilization, storage, and transportation equipment. This apparatus covers the detection of the presence of components in liquefied petroleum gases which can be...