Carbon residue tester for petroleum products

PT-D524-1025

PT-D524-1025 Ramsbottom Carbon Residue Apparatus conforms to the ASTM D524 standard for Ramsbottom Carbon Residue of Petroleum Products. It is used for testing the amount of carbon residue left after evaporation and pyrolysis of an oil, and it is intended to provide some indication of relative coke-forming propensity.

More details

Product info

Overview 
PT-D524-1025 Ramsbottom Carbon Residue Apparatus conforms to the ASTM D524 standard for Ramsbottom Carbon Residue of Petroleum Products. It is used for testing the amount of carbon residue left after evaporation and pyrolysis of an oil, and it is intended to provide some indication of relative coke-forming propensity. This test method is generally applicable to relatively nonvolatile petroleum products which partially decompose on distillation at atmospheric pressure.

Features
1.The apparatus can proceed four experiments at the same time, improving working efficiency.
2.The apparatus adopts metal bath temperature, constant temperature rapid, and bath temperature even.
3.The apparatus adopts digital display temperature controller, convenient to adjust the temperature controlling precision is high.
4.The output adopts solid-state relay, contactless, sparkless and noiseless. It is safe and reliable and with long lifetime.
5.Rational designed with easy operation and attractive appearance.

Technical parameters
1.Rated voltage: AC 220V±10%; 50Hz
2.Heating power: 2000W
3.Temperature controlling mode: Digital display
4.Temperature control point: 520°C±5°C
5.Sensor: Pt100 (platinum resistor)
6.Bath holes: four holes
7.Ambient requirements: Temperature 20~30°C; Humidity≤85%

8 other products in the same category: