Solid particulate pollutant tester for fuel jet

PT-D2276-1042

PT-D2276-1042 Solid particulate pollutant tester for fuel jet conforms to the ASTM D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling. The apparatus provides a gravimetric measurement of the particulate matter present in a sample of aviation turbine fuel by line sampling.

More details

Product info

Overview
PT-D2276-1042 Solid particulate pollutant tester for fuel jet conforms to the ASTM D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling. The apparatus provides a gravimetric measurement of the particulate matter present in a sample of aviation turbine fuel by line sampling. The objective is to minimize these contaminants to avoid filter plugging and other operational problem .It is used to test particulate contaminant in aviation turbine fuel using a field monitor.

Features

  1. The filter unit of the instrument is made of glass sand core, and the experimental result is obvious.
  2. The apparatus base is made of stainless steel, good corrosion resistance.
  3. The apparatus display shown by pressure gauge, pressure regulator with needle valve control, easy and intuitive.
  4. The apparatus comprises with vacuum pump which process small and light weight. Low noise, easy to use, safe and reliable.
  5. Reasonable design with attractive appearance and environment-friendly.

Technical parameters


Rated voltage

AC 220V±10%  50Hz

Power

250W

 Pressure display

-0.1 ~ 0 MPa 

Glass sand core filter

5L 

 Filter film sheet

0.8um≤0.1g

 Limit negative pressure value

≥0.09 MPa

Adjustment range

0.02 ~ 0.09MPa

Exhaust rate

> 20L/min

Solvent bottle

500ml

Ambient requirement

temperature: 15~30°C   Humidity≤85%

30 other products in the same category: