Disk Disc Peeling Tester Instrument for Plastic Film
PKT-APT30
This instrument tests the ink layer bonding strength of printed plastic film, also applicable to the bonding layer formed by other process such as lamination and coating. It is pneumatic drive to apply pressure, can adjust pressure.
Product info
Product Introduction
Disc Peeling Tester PKT-APT30 is a precise experimental equipment which develops and manufactures by LABXYIand based on GB standard etc and market requirement. It is suitable for plastic film by gravure printing process and cellophane decorative prints (including composite film prints) to carry out the test experiment of the binding fastness of the printing ink layer. It can also test the adhesion state of the surface layer formed by vacuum coating, surface coating, compounding and other related processes.
Testing Principle
The glass tape paper selected according to the standard is bonded to the printing surface of the sample ink after adjusting the test environment with the standard load, rolling speed and rolling times, and is placed and adjusted for a certain time, then they are peeled off with a certain pressure and stripping speed to observe the situation of the sample ink layer being peeled off, so as to judge the combination fastness of the printing ink layer.
Standard
JIS C2107, JIS Z0237
Technical parameters
Projects | Technical parameter |
Disc pressure | 100 N |
Stripping velocity | 0~ 1 m/s |
Diameter of A disk | 170 mm |
Width of A disk | 55 mm |
Diameter of B disk | 65 mm |
Width of B disk | 55 mm |
Contour dimension | L×W×H：547 ×365 ×300 mm |
Power | 150 W |
Power supply | AC 220V,50 Hz |
Product Features
Advanced configuration and technology
1. Simple design concept, delicate and exquisite workmanship, which equips with a color touch screen and convenient for users to quickly and conveniently carry out test operations, giving people a simple and refreshing visual effect.
2. Reasonably structural design makes the instrument run more smoothly, the test is more accurate, the life is longer, better long-term stability and energy saving.
3. The diameter, width, peeling angle and speed of disc A and disc B are designed in strict accordance with national standards to effectively ensure the reliability and versatility of the test data; The pressure between the discs can be adjusted arbitrarily to meet the different pressure needs of customers; Freely modify the test speed, running distance, and
free setting of parameters to meet more needs of customers.
4.Inner printer can print the test result directly
Application
 | Adhesive tapeproducts | Standard roll bonding for sticky testing ofadhesive tape products |
Factory Configuration
The standard configuration | Host, power cord |
Optional | Metrology certificate, air compressor |
User-supplied | 3-holes socket, grounding wire, air source (specification 2.5 HP, 8 kgpressure), high-pressure air pipe (Φ6 mm plastic pipe), air filter (dustfilter,oil filter, waterfilter) |
Note: LABXYI has always been committed to the innovation and improvement of product performance and function. For this reason, product technical specifications and appearance will also be changed accordingly, without prior notice. LABXYI reserves the right of modification and final interpretation.
