Multi-function NC solid phase extraction

PRE-SE-08A

This instrument can be applied to various types of food safety testing, agricultural residue monitoring, medical and health, environmental protection, commodity inspection, water and chemical production Laboratory.

More details

Product info

Application:
This instrument can be applied to various types of food safety testing, agricultural residue monitoring, medical and health, environmental protection, commodity inspection, water and chemical production Laboratory.

Introduction
NC SPE device fully support each step of the solid phase extraction operation, uses NC manner to precisely control various solutions through the column flow rate, but also has positive afford large volume continuous injection and timing to ensure that the target of Substances recovery and purity, reduce the relative deviation, to avoid cross-contamination between samples, multiple samples can be processed at the same time, further improve work efficiency, operation and maintenance is very simple, the general principle is to use numerical count of the pump, each cartridge connector provide independent relatively constant negative pressure so that various solutions according to standard analytical procedures required flow rate through the cartridge, to ensure efficient extraction of the target substance analysis, and finally converted to a small column elution rack, pressurized uniform elution avoid cross Pollution.

Feature:
1. Precise speed control, single-pass flow rate 0.01-7ml / min, to support large volume injection and elution positive pressure to avoid cross-contamination;
2. NC stepless operation, LED digital display, display the rotating speed and determine the flow rate through the digital, and a timing function;
3. Multi-channel,cartridge connector is resistance to acid, alkali, organic solvent, oxidant corrosion;
4. Simple operation, single operator can process 1-8 samples simultaneously, greatly improve work efficiency;
5. Extraction speed consistency, control easy to adjust;
6. Good tightness, stability, speed and the flow rate was linear.

Technical Parameter


Name

Parameter

Model

PRE-SE-08A

Total power

60W

channels

8

Rotating speed

0-100r/min

Flow rate

0.1-7mL/min

Timing range

0-99min

weight

15kg

dimension

495x330x325mm

Supporting Device Guide


Number

Name

Model &Specification

01

NC SPE

PRE-SE-08A

02

NC pump tube

     8

03

Diversion tube

24

04

Cartridge connector

     8

05

Solution collection shelf

24

06

adapter

16

6 other products in the same category: